TPI 343 Dual Input K-Type Thermocouple Thermometer with Field Calibration

343 Dual Input K-Type Thermocouple Thermometer with Field Calibration

 

TPI contact temperature testers are accurate, reliable, and built to last. Model 343 can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

AUTO FIELD CALIBRATION Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Amprobe AT-4000-A Advanced Wire Tracer Series

AT-4000-A Advanced Wire Tracer Series

 

Quickly trace energized and non-energized wires effortlessly with the Amprobe AT-4000-A Wire Tracer Series. Out-performing other wire tracers in its class, these advanced tracers combine features and functions to make locating wires more accurate and your job more efficient.

AT-4001-A – Advanced Wire Tracer with Soft Case
AT-4003-A – Advanced Wire Tracer
AT-4004-A – Advanced Wire Tracer with Clamp-On Attachment
AT-4005-A – Advanced Wire Tracer with Clamp-On Attachment, Battery Booster & Charge

  • Determines presence of energized or non-energized wires hidden behind walls, flooringor conduit
  • Pinpoints wires, breakers, neutrals, shorts,broken wires and ground lines
  • Operates safely and easily without interruptingpower or interfering with sensitive electronicequipment
  • Get accurate readings without rotating the unit– receiver is not position sensitive
  • Clamp-on attachment injects signal for non-contact operation (AT-4004-A and AT-4005-Aonly)
  • Optional Battery Booster accessory strengthens signal for open tracing (AT-4005-A only

Compliance HT-PR Series AC/DC Hipot/Ground Continuity

Compliance HT-PR AC/DC Hipot/Ground Continuity Tester Series

 

The New product of our Hipot Line Tester, the HT-PR serie Hipot Tester now with adjustable ground continuity test in range of 0.08-1.5 Ω, Auto-offset for test leads up to 1.0 Ω,

Performs 0-2000 AC or 0-2800 DC Hipot Test.

Neutral/Hot to Ground Leakage current test up to 20 mA AC or 5 mA DC.

  • High precision leakage current, duration and ground continuity resistance settings.
  • Allows no load setup of leakage current and test dwell times.
  • Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
  • Leakage currents can be set from 1-20 mA AC or 1-5 mA DC in 0.1mA increments.
  • Dwell times can be set from 1-60 seconds in 1 second increments.
  • Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
  • Small and light. 9.25″ wide x 4.75″ high x 10″ deep. 14 lbs. But rugged enough to test manufactured housing.
  • Ground continuity check is defeatable for testing two-wire products.
  • Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
  • J2 and J3 cords allow connection of pigtail power leads.
  • Simple test outcome judgement. Green lights mean pass – red lights mean fail. Failing tests sound a buzzer as well.
  • Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
  • Operation Instructions are printed on the rear panel for easy reference.
  • In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.

    RED lights and a buzzer leave no question if a failure has occurred.

  • Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
  • Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).
Ground Resistance and Bonding Continuity Tester
Compliance HT-2800PR
DC Hipot/Ground Continuity
Compliance HT-3000PR
AC/DC Hipot/Ground Continuity Tester
Compliance HT-2000PR
AC Hipot/Ground Continuity Tester

 

 

Fluke 750P/750R Series Pressure Modules

Fluke 750R29 Pressure ModuleFluke 750P/ 750R Series Pressure Modules

A Complete Family of Pressure Modules

A family of 48 pressure modules covers pressure calibrations from 0 to 1 in H20 to 10,000 psi (2.5 mBar to 690 bar).

Gage pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labeled for range, over pressure and media compatibility. All modules include NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multi-function and pressure calibrators (including: Fluke 754, 752, 726, 725, 721, 719 Pro, 719, 717 and legacy 741, 743, 744, 701 and 702 calibrators).

Fluke 750P/ 750R Series Pressure Modules are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. When used with the 750 Series Documenting Process Calibrators, pressure readings can be date/time stamped and stored electronically for later retrieval. This saves time, eliminates errors, and supports compliance with quality standards and regulations.

Click Here to See More Fluke Products!

Xeltek SuperPro 6104GP IC Device Chip Gang Programmer

Xeltek SuperPro 6104GP IC Device Chip Gang Programmer

The SuperPRO 6104GP incorporates 4 sets of 144 universal pin drivers and can work in stand-alone or PC-connected mode. This enhances the value of the investment as larger devices can be programmed. Devices with a Vcc of 1.2V to 5V are supported. An extensive range of adapters are available for the SuperPRO-6104GP and 4 x 48-pin DIP adapters are included. The SP-6104GP supports the largest number of devices in the industry: Over 92,000 IC devices from 332 manufacturers are supported and new devices are added frequently.

Introduction to SUPERPRO 6104GP
The SUPERPRO is a cost-effective, reliable, and high-speed universal programmer for mass-production. They are designed to communicate with a USB 2.0 port of PC by a standard USB cable. Online software provides friendly interface, powerful functions and flexibility.

It is the 8th generation high-speed programmers of XELTEK.

Programming Hardware
SP6104GP is a mass-product programmer that can burn into four chips at the same time. It contains four burning modules, as illustrated below. The module marked “1” is the main module.

The programming hardware includes the following items:
4 complete independent modules
High programming speed
144 pin universal pin-drivers design
Note: Universal adapters, support devices with 144 pins or less, for support of E/EPROM, FLASH, SCM, PLD, SRAM with normal or low voltage.
Chip insertion test
Asynchronous mode (Production mode)–operation starts as soon as the chip is inserted in the socket

Click here for more related items!

Xeltek SuperPro 610P Universal IC Chip Device Programmer

Xeltek SuperPro 610P Universal IC Chip Device Programmer

Xeltek SuperPro 610P is a series of cost-effective, reliable, and high-speed universal programmers. They are designed to communicate through a USB 2.0 port and to operate with most IBM-compatible desktop computers and notebook computers based on Pentium. Their menu-driven software interface facilitates the operation.

ARM9 32 Bit MCU + Linux ultra-fast algorithm processing engine
Programming speed up to 30% faster than SuperPro500P
Programs devices with Vcc as low as 1.2V
Built-in 48 universal pin drivers

Click here for more related items!

Xeltek Superpro 611S Universal Programmer IC Burner Intelligent High Speed

Xeltek SuperPro 6100 Universal IC Chip Device Programmer

SP611S Stand-Alone Universal Device Programmer

Ultra-High speed Stand-Alone device programmer, with USB Interface or standalone programming mode – the fastest universal programmer that includes standalone operation without a PC.

ARM9 32 Bit MCU + Linux ultra-fast algorithm processing engine.
Programming speed up to 30% faster than SuperPro501S.
Programs devices with Vcc as low as 1.2V.
Built with 48 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages.
The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad. A CF (compact flash) card stores the project files. In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.

ISP/ICP programming capability through optional ISP/ICP adapter.
Programming / testing features for TTL/CMOS logic ICs and memories.
Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Provides over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows XP / Vista / 7 / 8 (32/64 bit)

Includes the following advanced and powerful software functions:
Chip operation starts immediately upon proper chip insertion in Production Mode.
The Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
The Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
A Log file provides quality tracking
CE and ROHS Compliant

Hardware & Electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP.
PC interface: USB2.0 (High speed)
Stand-alone Feature: Supported, Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V / 2A
Main unit: Dimensions 178(L) * 130(W) * 40(h) mm
Package: Dimensions 320(L) * 300(W) * 85(H) mm; Weight 4 lbs (1.8Kg)

Click here for more related items!

Agilent U5855A TrueIR Series Thermal Imager

U5855A TrueIR Series Thermal Imager

 

The U5855A comes with Fine Resolution capability, which enhances the quality of thermal images by reconstructing the image based on multiple continuously captured infrared frames. This allows the U5855A to achieve an effective resolution of 320 x 240 pixels from a 160 x 120 pixel detector. And with the 4x digital zoom capability, it can magnify the thermal image of a far-away object to quickly spot problems and reveal even finer details. Now you are able to carry out more in-camera measurements and analysis with the in-camera monitoring capability for quality or diagnostic checks with its 0.07°C sensitivity.

Xeltek SuperPro 6100 Universal IC Chip Device Programmer

Xeltek SuperPro 6100 Universal IC Chip Device Programmer

Xeltek SuperPro 6100 Universal IC Chip Device Programmer

Expanded Features:
Support devices with VCC from 1.2V – 5V. 30% faster programming speed compared to SuperPro 5000 with ARM9 MCU Processor + Linux ultra-fast algorithm processing engine. Support files up to 256 GBytes. Built with 144 universal pin-drivers. Universal adapters are available for various package types up to 144 pins. More efficient for new device support.

Stand-alone mode (No PC required) and PC hosted mode.
Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip. Under stand-alone mode, the programmer is controlled via the 6-KEY keypad and the 20 character by 4 line LCD display. A CF (compact flash) card is used to store the project files.

Cluster 1-15 units for flexible volume production. Operate multiple units to construct a concurrent multi-programming system. ISP / ICP programming capability available via ISP / ICP adapter. Over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows XP / Vista / 7 / 8 (32/64 bit) Only IC manufacturer approved programming algorithms used for high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.

Advanced and powerful software functions:
Production mode start chip operation the moment the chip is inserted properly.
Project function simplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.
Password for project files can be set for volume production control
Batch command combines device operations like Program, Verify,and Security into a single command at any sequence.
Serial numbers generators are available as standard or customer-specific functions.
Log file is useful for quality tracking.

 

Click here for more related items!

HT Instruments Macrotest MACROTESTG1 and MACROTESTG2 Ground Resistance and Bonding Continuity Tester

HT Instruments Macrotest MACROTESTG1 and MACROTESTG2 Ground Resistance and Bonding Continuity Tester

 

The Macrotest G1 and G2 electrical safety testers evaluate earth resistance, 2-wire and 3-wire, ground resistivity with 4-wire method, and continuity of earth conductors with 200mA. Electrical parameters include V, A, W, VAR, VA, PF and harmonic analysis to the 49th order and THD%. The G2 offers insulation testing at 50VDC, 100VDC, 250VDC, 500VDC, and 1,000VDC. Both products also feature an intuitive touch GUI.

Earth Ground Resistance

The Macrotest Series easily measures earth ground (2 and 3 Point Method) and soil resistivity (4 Point Method) with an easy to understand graphical user interface and color touchscreen.

The Macrotest Series easily measures earth ground (2 and 3 Point Method) and soil resistivity (4 Point Method) with an easy to understand graphical user interface and color touchscreen. The meter can store internally up to 999 measurements. The included software enables easy data transfer to a computer, tablet or phone via built-in Wi-Fi or USB connection where it can be archived or used to generate reports.

The HTAnalysis application allows users, in real time, to view, analyze, upload and share measurements on the HT Cloud. This is a free app that is available to all.

The Macrotest Series provides a complete set of easy to use measurements.

The Macrotest Series utilizes the three point test (fall of potential), which measures earth ground resistance as required by equipment manufacturer specifications and as mandated by national code requirements for proper grounding. The two point test is used to test grounding wires resistance and connection points resistance between ground system elements (i.e. wires and electrodes). The tester can also be used to test soils for a new ground system design with the 4-point.

Ground Resistance and Bonding Continuity Tester
HT Instruments MACROTESTG1Ground Resistance and Bonding Continuity Tester
HT Instruments MACROTESTG2Insulation Resistance, Ground Resistance and Bonding Continuity Tester
HT Instruments KITMACROTESTG1MacrotestG1 + VA504 + T2100
HT Instruments KITMACROTESTG2MacrotestG2 + VA504 + T2100