Megger MIT1025-KIT MIT1525 with a VF2 Voltage Detector, Extra long 16.5 ft leadset and a Stitch in Time Training Book

MIT1025-KIT MIT1525 with a VF2 Voltage Detector, Extra long 16.5 ft leadset and a Stitch in Time Training Book

 

The new range of insulation resistance testers consists of three models: two 5 kV units (MIT515 and MIT525) and a 10 kV unit (MIT1025). Resistance measurement is available up to 10 TΩ for the 5 kV models and 20 TΩ for the 10 kV model. The new instruments are smaller and lighter than previous models yet offer advanced features and rapid charge capability.

A key productivity feature is the ability to take measurements when connected to line power/mains with a dead battery. Intelligent battery charging ensures the optimum charge rate as a function of battery level, resulting in minimum charge times.

The rugged, unique dual case design provides the ultimate protection for a portable instrument and a clip-on lead pouch ensures that leads remain with the instrument at all times. The case lid is removable for improved terminal access. IP rating is IP65 with the case closed preventing water/dust ingress. High reliability and safety are built in; all models are safety rated to CATIV 600 V and are double insulated. Five preset voltage ranges are provided in insulation test mode, plus a user settable lock voltage range. Any selectable test voltage may be locked and restored via the selector switch, thereby increasing efficiency of commissioning and repetitive tests. Preconfigured diagnostic tests include Polarization Index (PI), Dielectric Absorption Ratio (DAR), dielectric discharge (DD), Step Voltage (SV) and ramp test. The ramp function gradually increases voltage up to a selected level while graphing current vs. voltage (graph downloadable). Graphs can be compared to example curves in IEEE 95-2002 to reveal a variety of faults difficult to detect otherwise. Small defects can be easily detected without risking the sudden large voltage increments produced by a Step Voltage test. Monitoring the developing graph during test enables the operator to terminate prior to breakdown, thereby reducing the possibility of damage to already flawed insulation. These units are particularly informative on polyester, asphalt and epoxy-mica insulations. They can also test voltage suppression devices.

FLIR CM174 Imaging 600A AC/DC Clamp Meter with IGM

The FLIR CM174 Imaging 600A AC/DC Clamp Meter with IGM is the first clamp meter equipped with a built-in thermal imager that can quickly lead you to problems you can’t see with a standard clamp meter.

Featuring Infrared Guided Measurement (IGM) technology, the CM174 visually guides you to the precise location of a potential electrical problem, identifying dangerous and unknown problem areas safely. Confirm your findings with accurate amperage and voltage measurements, and center-point temperature readings. The narrow jaw enables greater accessibility, and its compact form-factor fits easily into your back pocket – so you can have thermal imaging at your fingertips everywhere you go. The FLIR CM174 will quickly become your primary electrical troubleshooting tool.

Click Here to see more FLIR Products!

FLIR TG54/TG56 Spot IR Thermometers

TG54/TG56 Spot IR Thermometers

 

The TG54 and TG56 Spot IR (Infrared) Thermometers provide non-contact surface temperature readings so you can quickly and easily take measurements in places that are out of reach. Providing a distance-to-spot ratio of up to 30:1, the TG54 and TG56 can measure smaller targets from a safer distance. New mode options give you control to view your current reading and last two temperature readings simultaneously. The TG54 and TG56 are built with a color screen that makes it easy to navigate and select settings, plus adds visibility and efficiency to the advanced feature set. The TG54 and TG56 are your go-to, pocket-sized devices for ef?cient temperature measurement.

Veto Pro Pac Open/Closed Top Tool Bag Series

The original VETO PRO PAC series of bags includes solutions for carpenters, electricians and technicians. Whether you’re doing a quick job with a few key tools or a major construction project that requires bringing your entire arsenal, you’ll find an open- or closed-top option to suit any work environment or challenge.

Veto Pro Pac Tool Bags are designed with the company’s patented center panel and hinged ergonomic handle, vertically tiered pockets, heavy duty construction and stabilizing injection molded waterproof base that keeps tools dry in the nastiest of conditions. And, no more digging and dumping out your tools only to have to put everything back in the bag, which is a waste of time.

This bag is the “soft side” version of the classic carpenter’s wooden tool box. It stores longer tools like hand saws, framing squares, pry bars, framing hammers, etc., and offers ergonomic transportation and protection on and off the jobsite.

Veto Pro Pac Top Tool Bag
1TG2-1500 Veto Pro Pac LC

Closed Top Tool Bag
1TG2-1500 Veto Pro Pac OT-LC

Open Top Tool Bag
1TG2-1500 Veto Pro Pac OT-XL

Open Top Tool Bag
1TG2-1500 Veto Pro Pac OT-XXL

Open Top Tool Bag
1TG2-1500 Veto Pro Pac XL

Closed Top Tool Bag
1TG2-1500 Veto Pro Pac XXL-F

Closed Top Tool Bag

Click here for more related items!

Veto Pro Pac Tech Series Tool Bags That Work

The Veto Pro Pac Tech Series tool bags are designed for Service Technicians that need to store and carry a wide variety of hand tools, testers, gauge and meters.

Veto Pro Pac Tech Series offers technicians a better way to organize their tools and increase work efficiency. Whether you’re working on a small job that requires just a few tools, or a large job that’s got you walking long distances or lugging all your tools up a ladder, this system of bags is designed to work together to solve any jobsite challenges technicians might face.

Veto Pro Pac Tech Series
1TG2-1500 Veto Pro Pac TECH-PAC

Tech Series – TECH-PAC
1TG2-1500 Veto Pro Pac MB

Tech Series – MB
1TG2-1500 Veto Pro Pac MB2

Tech Series – TECH-PAC
1TG2-1500 Veto Pro Pac TECH PAC-LT

Tech Series – TECH PAC-LT
1TG2-1500 Veto Pro Pac TECH-XL

Tech Series – TECH-XL
1TG2-1500 Veto Pro Pac TECH-LC

Tech Series – TECH-LC
1TG2-1500 Veto Pro Pac TP3

Tech Series – TP3
1TG2-1500 Veto Pro Pac TP4

Tech Series – TP4

Click here for more related items!

Veto Pro Pac CT-LC and CT-XL Cargo Totes

The Cargo Totes™ are the latest addition to the Veto Pro Pac line of high quality tool storage products and perfect catch-all bags for raiding the van, carry-all bags for end of the day cleanup, and a more efficient way to organize the back of the truck.

Designed to stand up to the rigors of daily use, the Cargo Totes™ feature 1800 Denier Body Fabric, leather handle grips and Veto’s signature 3mm thick polypropylene waterproof base. Veto Pro Pac’s patent pending design keeps the Cargo Totes™ standing upright and open at all times for easy access, a feature not seen on other tote products.

An optional shoulder strap is sold separately.

In addition to use on the job-site, the Cargo Totes™ are multi-use bags and IDEAL for:

  1. Outdoor activities (hunting, fishing, camping, boating, sports equipment storage)
  2. Everyday home storage
  3. Secondary travel bags
Veto Pro Pac CT-LC and CT-XL Cargo Totes
Veto Pro Pac CT-LC
Small Cargo Tote
Veto Pro Pac CT-XL
Large Cargo Tote

Click here for more related items!

VibrAlign Fixturlaser Dials Kit

VibrAlign Fixturlaser Dials Kit

The Fixturlaser Dials Kit is a unique dial indicator kit designed specifically for use with an Android or iOS system for Shaft Alignment. The app is downloadable for free to anyone owning an Android (Play) or iOS device (iTunes). For users utilizing the Fixturlaser Dials Kit, the app automatically calculates all bar sag, eliminating the most common shaft alignment error. The HMI (Human-Machine-Interface) follows the same intuitive graphics and icon based programming of the Fixturlaser brand laser alignment systems utilizing the special Vertizontal Alignment process.

Fixturlaser Dials Kit is designed to perform reverse rim shaft alignments. Together with the Fixturlaser Dials App it performs dial indicator shaft alignment calculations as it guides the user through the reverse rim alignment process with process with its stunning 3D graphical interface. Two dial indicators are included. The two V-brackets come assembled with chains that will allow mounting on shafts up to 175 mm in diameter, 450 mm with optional extension chains.

VibrAlign100-D1_DialKit_tn

Carrying Case
Two medium rods (7″) with reversible dial clamps

Set-Up Guide
Two dial indicator brackets/stands with landing pads

Optional Nexus 7 Tablet
Designed to work with the Verti-Zontal alignment method

Fixturlaser Kit

VibrAlign100-D1_2_tn

The optional Google Nexus 7 tablet, with the sharpest 7-inch tablet screen ever, is the perfect match for the Fixturlaser Dials Kit.

When this 32GB tablet is loaded with the free Fixturlaser Dials App, you’ll be able to perform alignments using the Verti-Zontal method and leave the math up to the app.

The Fixturlaser Dials Kit

VibrAlign100-D1_9
The Fixturlaser Dials Kit is designed to perform reverse rim shaft alignments. Together withThe Fixturlaser Dials App it performs dial indicator shaft alignment calculations as it guides the user through the reverse rim alignment process with its stunning 3D graphical interface.

Two dial indicators are included.The two V-brackets come assembled with chains that will allow mounting on shafts up to 175 mm in diameter, 450 mm with optional exten – sion chains.

The kit, shipped in a durable fitted case, includes 3 pairs of dial indicator rods in 3 lengths to maximize the mounting options.The steel rods are hol – low to minimize sag.

Android, iOS phones or tablets are the perfect match for the Fixturlaser Dials Kit. When loaded with the free Fixturlaser Dials App, you’ll be able to perform alignments using the Verti-Zontal method and leave the math to the app.

VibrAlign Fixturlaser Dials Kit
VibrAlign 100-D1
Fixturlaser Dials Kit
VibrAlign 100-D1-TAB
Fixturlaser Dials Kit w/ Android Tablet

Click here for more related items!

Fluke Networks 1TG2 Onetouch at G2

Troubleshoot copper, fiber optic and Wi-Fi network problems from a client device to cloud-hosted applications and everything in between – even when you are not there. Troubleshoot persistent problems and validate network performance on-site in real-time. Troubleshoot intermittent problems and identify vulnerabilities by automatically uploading results to the cloud for web-based performance trending and root cause analysis.

Network technicians spend 25 percent of their time troubleshooting—taking time away from critical tasks such as deploying new technologies, and optimizing network performance. With most problems requiring an hour or more to solve and 40% requiring escalation, end-user productivity also suffers. Based on a recent Fluke Networks’ study, 72% of IT organizations operate without a standardized troubleshooting process. Making the situation worse is the fact that intermittent problems take more than twice as long to solve, and that staff spends on average five hours a week traveling to and from problem sites.

Fluke Networks Onetouch at G2
1TG2-1500 1TG2-1500

ONETOUCH AT G2 ETHERNET TESTER
1TG2-1500 1TG2-1500-2PK

ONETOUCH AT G2 1500 2-PACK
1TG2-1500 1TG2-1500-LRAT2

ONETOUCH AT G2 1500 AND LINKRUNNER AT 2000
1TG2-1500 1TG2-1500W

ONETOUCH AT G2 WI-FI TESTER
1TG2-1500 1TG2-1500W-LRAT2

ONETOUCH AT G2 1500W AND LINKRUNNER AT 2000
1TG2-1500 1TG2-3000

ONETOUCH AT G2 ETHERNET WI-FI TESTER
1TG2-1500 1TG2-3000-1T10G1M

ONETOUCH AT G2 3000 AND ONETOUCH AT 10G 1000 MODULE
1TG2-1500 1TG2-3000-ACKLRAT2

ONETOUCH AT G2 3000 AND AIRCHECK AND LINKRUNNER AT 2000
1TG2-1500 1TG2-3000-CSA

ONETOUCH AT G2 3000 AND CLEARSIGHT ANALYZER PC SOFTWARE ON CD
1TG2-1500 1TG2-3000-LRAT2

ONETOUCH AT G2 3000 AND LINKRUNNER AT 2000
1TG2-1500 1TG2-3000-MOD

ONETOUCH AT G2 ETHERNET WI-FI TEST MODULE

Click Here to see more Yokogawa Products!

Veto Pro Pac CT-LC and CT-XL Cargo Totes

Veto Pro Pac CT-LC and CT-XL Cargo Totes

The Cargo Totes™ are the latest addition to the Veto Pro Pac line of high quality tool storage products and perfect catch-all bags for raiding the van, carry-all bags for end of the day cleanup, and a more efficient way to organize the back of the truck.

Designed to stand up to the rigors of daily use, the Cargo Totes™ feature 1800 Denier Body Fabric, leather handle grips and Veto’s signature 3mm thick polypropylene waterproof base. Veto Pro Pac’s patent pending design keeps the Cargo Totes™ standing upright and open at all times for easy access, a feature not seen on other tote products.

An optional shoulder strap is sold separately.

In addition to use on the job-site, the Cargo Totes™ are multi-use bags and IDEAL for:

  1. Outdoor activities (hunting, fishing, camping, boating, sports equipment storage)
  2. Everyday home storage
  3. Secondary travel bags
Veto Pro Pac CT-LC and CT-XL Cargo Totes
Veto Pro Pac CT-LC
Small Cargo Tote
Veto Pro Pac CT-XL
Large Cargo Tote

Click here for more related items!

VibrAlign 100-BH2 Laser Pulley Alignment Tool for Belt Hog II

VibrAlign 100-BH2 Laser Pulley Alignment Tool for Belt Hog II

Belt Hog Laser Pulley Alignment Tool

Minimize Downtime
Use pulley groove as reference point.

Minimal Training Needed
Reduce bearing wear and vibration levels while extending bearing lifespan.

Minimizes Unscheduled Stops
Accurate, measures from the pulley grooves where the belts operate.

Belt Hog II Laser Pulley Alignment Tool

The VibrAlign Belt Hog uses the pulley groove as the reference, allowing you to achieve a precise belt alignment which reduces wear, bearing failures and vibrations.

With the Belt Hog you are never in doubt on whether your belt transmissions are aligned or not.
By using the groove as reference you will achieve a precise alignment which reduces belt wear, bearing failures and vibrations.

VibrAlign100-BH2_3_tn

 

Belt Hog Pulley Alignment Tool

VibrAlign100-BH2_2_tn

Squealing, shaking, out-of-line belts and pulleys are more than a nuisance. They’re the cause of expensive downtime, shortened equipment life, and inefficient operation. If you ever have those problems, it’s time to holler for the Belt Hog.

The Belt Hog makes it simple to align belts and pulleys. You won’t have to remove the belts to make quick, accurate adjustments over distances of 6″ to 20 feet. One person can accomplish an alignment with no training other than reading the short instruction manual.

Belt Hog mounts in the grooves-right where the power is transferred. Groove mounting makes it simpler to keep everything parallel. Belt guards can often be left on, and pulleys on shafts set in different directions can be aligned just as easily. Bright dual LASER beams let you know when you’ve got things straight.

Belt Hog Benefits:

This little 1.6-pound tool is a heavyweight when it comes to making things simple. You’ve heard of living high on the hog? Welcome to working high on the Hog.

Benefits of good alignment:

  • Reduces downtime
  • Extends belt and pulley life
  • Reduces vibration and belt noise
  • Minimizes unscheduled stops

Advantages of the Belt Hog:

  • Accurate, measures from the pulley grooves where the belts operate
  • Easy to use, no training required
  • Fast, one person operation
  • No need to remove the belts
  • Measures vertical angle, horizontal angle and offset simultaneously
  • Measures distances from 6″ to 20 feet
  • Measures pulley diameters 3″ and larger

Click here for more related items!