Psiber LM30 LanMaster 30 Outlet Identifier

LM30 LanMaster 30 Outlet Identifier

 

Ethernet (10/100), Token Ring and Telephone Testing with one Tool
The LanMaster 30 Outlet Identifier provides LAN/Telecom Installers and Maintainers a tool to quickly test an unknown wall outlet and identify the type of circuit. Connecting equipment to an unknown outlet can damage NICs, modems, telephones or test equipment that do not have a compatible electrical interface.

Some PBX systems can provide voltage and current levels that far exceed the limits of telecom or network devices resulting in equipment failure when connected. Knowing the type of signals present at an outlet not only protects against equipment damage, but also reduces troubleshooting time finding physical layer problems.

Psiber LM26 LanMaster 26 Pro Link Tester

LM26 LanMaster 26 Pro Link Tester

 

LanMaster 26 Link Tester
Tests Gigabit, VoIP and Powered Ethernet Ports

The LANMASTER 26 Link Tester provides LAN Installers and Maintainers a tool with the testing capability for Gigabit (1000baseTX) over copper, Fast Ethernet (100baseTX), Standard Ethernet (10baseT) links as well as VoIP/PoE detection.

The LanMaster 26 measures the voltage supplied by the VoIP or PoE port with typical loading to ensure that the voltage level is adequate.

The port ID feature identifies which port on a hub or switch that a wall outlet is connected by flashing the Link light on the connected port.

Psiber LM25 LanMaster 25 Deluxe Link Tester

LM25 LanMaster 25 Deluxe Link Tester

 

Fast Ethernet Test Tool for Managing and Maintaining Networks

The LANMASTER 25 Link Tester provides LAN Installers and Maintainers a tool to quickly test Fast Ethernet (100baseTX) and Standard Ethernet (10baseT) links.

Fast Ethernet LAN products have a wide range of new features and capabilities. Auto-sensing, Auto-negotiation and Full Duplex capabilities are optional requirements to the Fast Ethernet (IEEE 802.3u) standard.

Knowing equipment capabilities is essential to optimizing network system performance. Links can be established using three different types of Link Signals. Connecting equipment with mismatched signal types can cause high error rates and collisions on the Link. In just three seconds, the LANMASTER 25 decodes the Link Signals and displays the exact configuration and signal type of the equipment connected to the Link.

Psiber LM20 LanMaster 20 Basic Link Tester

LM20 LanMaster 20 Basic Link Tester

 

The LANMASTER 20 Link Tester provides LAN Installers and Maintainers a tool to quickly test Fast Ethernet (100baseTX) and Standard Ethernet (10baseT) links.

Fast Ethernet LAN products have a wide range of new features and capabilities. Auto-sensing, Auto-negotiation and Full Duplex capabilities are optional requirements to the Fast Ethernet (IEEE 802.3u) standard. Knowing equipment capabilites is essential to optimizing network system performance.

In just three seconds, the LANMASTER 20 decodes the Link Signals and displays the exact configuration of the equipment connected to the Link.

The Model 20 also verifies Link connectivity to the far end, tests for reported faults and determines polarity of the outlet or cable.

Psiber LEK8015 LanExpert – LE80 Network Analyzer with CT15-Cable Tracker Probe

LEK8015 LanExpert – LE80 Network Analyzer with CT15-Cable Tracker Probe

 

LanExpert 80
Inline Gigabit Network Analyzer
The essential tool for LAN installers, technicians, managers and service providers The LANEXPERT Network Analyzer is an essential tool for installing, monitoring, maintaining, upgrading or troubleshooting any network. The LANEXPERT utilizes a color touch screen interface to access one of the most complete suites of test and analysis functions available in a portable test tool.

The Inline Mode allows users to non-intrusively monitor network traffic (10/100/1000BaseTX) to identify protocols, port usage, VoIP statistics and network utilization. The LANEXPERT can capture and store up to 10,000 packets with user defined filters for detailed analysis in the field or downloaded over the network or to a USB flash drive. Using either RJ-45 port, tests including Ping, Link, Trace Route, DHCP and Discovery are used to quickly identify network problems The LANEXPERT can generate up to 100% traffic loading with control of packet rate and size to demonstrate network performance at various traffic levels.

LE85S LanExpert – Inline Copper/SM Fiber Gigabit Network Analyzer

LE85S LanExpert – Inline Copper/SM Fiber Gigabit Network Analyzer

 

LanExpert 85

Dual Media Inline Gigabit Network Analyzer
The essential tool for LAN installers, technicians, managers and service providers
The LanExpert 85 network analyzer provides expert assistance for all tiers of LAN installers, technicians and managers working with either copper or fiber media. An extensive suite of test capabilities include: Link Detection, Ping and Trace Route to verify network connectivity; Single Ended or Inline Packet Monitoring, Filtering and Capture to identify and solve complex problems; User defined Traffic Generation and structured RFC 2544 Stress Test to predict network performance under varying load conditions; Loopback, VoIP and Email tests to ensure proper performance of key network services. The LanExpert is a single solution for network professionals to quickly maintain and optimize networks from the fiber or cable to the packet.

Psiber LE85M LanExpert- Inline Copper/MM Fiber Gigabit Network Analyzer

LE85M LanExpert- Inline Copper/MM Fiber Gigabit Network Analyzer

 

LanExpert 85

Dual Media Inline Gigabit Network Analyzer
The essential tool for LAN installers, technicians, managers and service providers
The LanExpert 85 network analyzer provides expert assistance for all tiers of LAN installers, technicians and managers working with either copper or fiber media. An extensive suite of test capabilities include: Link Detection, Ping and Trace Route to verify network connectivity; Single Ended or Inline Packet Monitoring, Filtering and Capture to identify and solve complex problems; User defined Traffic Generation and structured RFC 2544 Stress Test to predict network performance under varying load conditions; Loopback, VoIP and Email tests to ensure proper performance of key network services. The LanExpert is a single solution for network professionals to quickly maintain and optimize networks from the fiber or cable to the packet.

Psiber LE80 LanExpert – Inline Gigabit Network Analyzer

LE80 LanExpert – Inline Gigabit Network Analyzer

 

LanExpert 80
Inline Gigabit Network Analyzer
The essential tool for LAN installers, technicians, managers and service providers The LANEXPERT Network Analyzer is an essential tool for installing, monitoring, maintaining, upgrading or troubleshooting any network. The LANEXPERT utilizes a color touch screen interface to access one of the most complete suites of test and analysis functions available in a portable test tool.

The Inline Mode allows users to non-intrusively monitor network traffic (10/100/1000BaseTX) to identify protocols, port usage, VoIP statistics and network utilization. The LANEXPERT can capture and store up to 10,000 packets with user defined filters for detailed analysis in the field or downloaded over the network or to a USB flash drive. Using either RJ-45 port, tests including Ping, Link, Trace Route, DHCP and Discovery are used to quickly identify network problems The LANEXPERT can generate up to 100% traffic loading with control of packet rate and size to demonstrate network performance at various traffic levels.

Psiber CTK5015 CableTool Multifunction Cable Meter Kit

CTK5015 CableTool Multifunction Cable Meter Kit

 

CableTool Multifunction Cable Meter

MEASURE CABLE LENGTH or distance to a cable fault up to 2500 FEET MEASURE VOLTAGE up to 250 VOLTS

Length and Voltage Meter
The CableTool model CT50 provides contractors, CATV, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables up to a distance of 2500 feet.

Using TDR technology, the CableTool diagnoses cable faults with no launch or dead zone and an accuracy to ±2%.
Simply select the appropriate cable type from the pre-stored library or enter the cable NVP, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed.

Psiber CTK1215 High Power CableTracker Network ID Kit

CTK1215 High Power CableTracker Network ID Kit

 

CableTracker CTK1215 Tone & Probe Kit

Ultra High Power Cable Tracing System

A Tone Generator for Network Testing
Traditional Tone Generators were designed for one primary mission; to identify the termination point of a cable. Unfortunately, these were designed for telephony, not network maintenance. Why else would they have RJ-11 plugs?

The CT10 incorporates 3 link light activation speeds to easily identify user cable termination ports by simply looking for the blinking lights.

Why three? Because ethernet switches do not react the same to activation. Three speeds ensures the widest compatibility available.