Psiber CTK1015 CableTracker Network ID Kit

CTK1015 CableTracker Network ID Kit

 

CABLETRACKER Network ID Kit
The CABLETRACKER Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The CABLETRACKER Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing.

Psiber CT50 CableTool Multifunction Cable Meter

CT50 CableTool Multifunction Cable Meter

 

CableTool Multifunction Cable Meter

MEASURE CABLE LENGTH or distance to a cable fault up to 2500 FEET MEASURE VOLTAGE up to 250 VOLTS

Length and Voltage Meter
The CableTool model CT50 provides contractors, CATV, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables up to a distance of 2500 feet.

Using TDR technology, the CableTool diagnoses cable faults with no launch or dead zone and an accuracy to ±2%.
Simply select the appropriate cable type from the pre-stored library or enter the cable NVP, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed.

Voltage on the wires up to 250v is continuously measured by the built in, true RMS voltmeter and is displayed to warn of a potentially unsafe condition.

The CableTool CT50 will also inject a tracing tone onto the conductors to trace cables with a standard tone probe.

Psiber CT12 High Power CableTracker Toner

CT12 High Power CableTracker Toner

 

CableTracker CT12

The most powerful Tone Generator available

Up to 10 times more powerful
Trace tone signals on high performance twisted pair, coaxial and even shielded cables. The CableTracker 12 Ultra High Power Tone Generator is up to 10 times more powerful than other generators.The CableTracker’s incredible 190mW power output helps to quickly and accurately solve the most difficult cabling installation and maintenance jobs.

Simple to Use
“ON” transmits the tone signals continuously until the operator turns the unit off.

“AUTO” transmits the tone signals for approximately 12 minutes and then shuts down to conserve battery life.

SKF Microlog Analyzer GX Series

SKF Microlog Analyzer GX Series

  • Supports Oracle and Microsoft SQL Server database managers
  • Interconnectivity with multiple enterprise-wide software programs and systems
  • Easy for novice or experienced users to learn and use
  • Scalable and flexible to meet your unique needs
    •  – Start with one of three base models and expand functionality according to your needs
    • – Easy personalization for individual users
    • – Application add-ons extend core functionality without migration to other base models
    • – User access control to support functional roles and department needs
    • – User programmable functions compute your company’s KPIs (Key Performance Indicators)
  • Compliance reporting and scheduling help direct tasks and workforce
  • One software program to manage asset condition data from portable and on-line devices

SKF Microlog Analyzer GX Series

Modular approach offers seamless expansion
The modular design of the SKF Microlog GX series offers customers the option to upgrade and expand functionality without having to buy another instrument. Accessories are inter-changeable between models. The SKF Microlog GX is shipped with the full SKF Microlog suite of modules installed. To add additional functionality, units can be upgraded to more advanced models, simply purchase the module and enter the supplied license key.

For companies who are interested in an entry-level route-based data collector, the SKF Microlog GX-R model offers ease of use and implementation with multi-route, single channel data collection. This model features a measurement range of 80 kHz F max and up to 25 600 FFT lines of resolution.

The SKF Microlog GX-M includes multiple routes, and non-route data collection, four channel FFT analysis, three channel simultaneous triax and the Balancing module.

Additional features are added to create the SKF Microlog GX-F model, which includes all modules. The SKF Microlog GX-M can also be upgraded to any of the other modules including Run up Coast down module that is used to record and analyze data from machines where noise or vibration levels are changing with speed or time, and the Frequency Response Function (FRF) module, which uses a modal hammer to establish the properties of mechanical structures.

Portable data collector / FFT analyzer
The SKF Microlog GX series are high performance, one to four channel, route-based portable data collector / FFT analyzers that provide unmatched versatility and functionality in a rugged, industrial design. Developed for use in a wide range of industries, the SKF Microlog GX series is approved for use in hazardous environments requiring ATEX, IECEx and Class I Division 2 certifications.

State-of-the-art technology
With a robust, high-speed data processor, the SKF Microlog GX series captures full feature route and non-route dynamic (vibration) and static (process) measurements from many sources. Fixed mode autoranging automatically selects an input range based on the sensor type and sensitivity. Three channel simultaneous triaxial input with the separate tachometer input enables faster, more comprehensive data collection without adding to collection time. The SKF Microlog GX series also includes a triggering functionality that enables the unit to examine the trigger signal first, and then automatically set the trigger level. For even faster data collection, users can configure up to 12 measurements for automatic, one button data collection at a measurement location.

Asset data available fast, enterprise wide and in the formats you want
The route based SKF Microlog GX series transfers data to SKF @ptitude Analyst software, a comprehensive software solution with powerful diagnostic and analytical capabilities. SKF @ptitude Analyst provides fast, efficient and reliable storage, analysis, and retrieval of complex asset information and makes the information accessible throughout your entire organization.

With this powerful analysis tool, you are in complete control – from the way you set up hierarchies, filtered workspaces, routes, and analysis parameters, to the customized format for reporting. You can collect information based on location, machine type, frequency, or other selections. SKF @ptitude Analyst allows you to determine the appropriate limits for alarm conditions and how alarms are categorized.

You receive consistent, reliable data in the format that suits you best. SKF @ptitude Analyst can incorporate data from other sources, such as OPC servers, and seamlessly interface with your organization’s Computerized Maintenance Management System (CMMS), Enterprise Resource Planning (ERP) or other information management systems.

 

SKF Microlog Analyzer GX Series
SKF CMXA 75-M-K-FRK-02
Condition Monitoring
SKF CMXA 75-M-K-JCI-04
Condition Monitoring
SKF CMXA 75-M-K-SL-Z2
Condition Monitoring

Click here for more related items!

SKF Microlog Analyzer AX Series – CMXA80

SKF Microlog Analyzer AX Series – CMXA80

  • Supports Oracle and Microsoft SQL Server database managers
  • Interconnectivity with multiple enterprise-wide software programs and systems
  • Easy for novice or experienced users to learn and use
  • Scalable and flexible to meet your unique needs
    • – Start with one of three base models and expand functionality according to your needs
    • – Easy personalization for individual users
    • – Application add-ons extend core functionality without migration to other base models
    • – User access control to support functional roles and department needs
    • – User programmable functions compute your company’s KPIs (Key Performance Indicators)
  • Compliance reporting and scheduling help direct tasks and workforce
  • One software program to manage asset condition data from portable and on-line devices

SKF Microlog Analyzer GX Series

Modular approach offers seamless expansion
The modular design of the SKF Microlog GX series offers customers the option to upgrade and expand functionality without having to buy another instrument. Accessories are inter-changeable between models. The SKF Microlog GX is shipped with the full SKF Microlog suite of modules installed. To add additional functionality, units can be upgraded to more advanced models, simply purchase the module and enter the supplied license key.

For companies who are interested in an entry-level route-based data collector, the SKF Microlog GX-R model offers ease of use and implementation with multi-route, single channel data collection. This model features a measurement range of 80 kHz F max and up to 25 600 FFT lines of resolution.

The SKF Microlog GX-M includes multiple routes, and non-route data collection, four channel FFT analysis, three channel simultaneous triax and the Balancing module.

Additional features are added to create the SKF Microlog GX-F model, which includes all modules. The SKF Microlog GX-M can also be upgraded to any of the other modules including Run up Coast down module that is used to record and analyze data from machines where noise or vibration levels are changing with speed or time, and the Frequency Response Function (FRF) module, which uses a modal hammer to establish the properties of mechanical structures.

Portable data collector / FFT analyzer
The SKF Microlog GX series are high performance, one to four channel, route-based portable data collector / FFT analyzers that provide unmatched versatility and functionality in a rugged, industrial design. Developed for use in a wide range of industries, the SKF Microlog GX series is approved for use in hazardous environments requiring ATEX, IECEx and Class I Division 2 certifications.

State-of-the-art technology
With a robust, high-speed data processor, the SKF Microlog GX series captures full feature route and non-route dynamic (vibration) and static (process) measurements from many sources. Fixed mode autoranging automatically selects an input range based on the sensor type and sensitivity. Three channel simultaneous triaxial input with the separate tachometer input enables faster, more comprehensive data collection without adding to collection time. The SKF Microlog GX series also includes a triggering functionality that enables the unit to examine the trigger signal first, and then automatically set the trigger level. For even faster data collection, users can configure up to 12 measurements for automatic, one button data collection at a measurement location.

Asset data available fast, enterprise wide and in the formats you want
The route based SKF Microlog GX series transfers data to SKF @ptitude Analyst software, a comprehensive software solution with powerful diagnostic and analytical capabilities. SKF @ptitude Analyst provides fast, efficient and reliable storage, analysis, and retrieval of complex asset information and makes the information accessible throughout your entire organization.

With this powerful analysis tool, you are in complete control – from the way you set up hierarchies, filtered workspaces, routes, and analysis parameters, to the customized format for reporting. You can collect information based on location, machine type, frequency, or other selections. SKF @ptitude Analyst allows you to determine the appropriate limits for alarm conditions and how alarms are categorized.

You receive consistent, reliable data in the format that suits you best. SKF @ptitude Analyst can incorporate data from other sources, such as OPC servers, and seamlessly interface with your organization’s Computerized Maintenance Management System (CMMS), Enterprise Resource Planning (ERP) or other information management systems.

 

SKF Microlog Analyzer GX Series
SKF CMXA 75-M-K-FRK-02
Condition Monitoring
SKF CMXA 75-M-K-JCI-04
Condition Monitoring
SKF CMXA 75-M-K-SL-Z2
Condition Monitoring

Click here for more related items!

Seek Thermal Compact Series

SEEKLOGO

Compact Series

http://assets.tequipment.net/assets/1/26/Seek_Thermal_Compact_Android_Camera_Display.jpg

 

  • Campers to quickly scan around a campsite for dangerous animals
  • Hunters to track game, scout terrain, and follow bloodtrails
  • Anyone looking for increased home security can detect intruders from nearly 1,800 feet away
  • Boaters to detect harmful objects on the water at night
  • Electrical Engineers to inspect components, circuit boards and assemblies

Plug Seek Compact directly into your iPhone and in seconds you can see the heat all around you. The advanced thermal sensing technology lets you detect a massive range of temperatures from -40° up to 626° F and locate specific sources of heat instantly. Use Seek Compact in broad daylight or total darkness. Detect heat through walls, pipes, brush, and bad weather. Share and store the images and videos you capture. What you Seek is completely up to you.

Powerful and portable, the Seek Compact is a state-of-the art thermal camera that connects directly to your smartphone (iOS or Android). Using over 32,000 thermal pixels, Compact creates an image from invisible infrared light. With its wide 36° field of view, Compact is perfect for use indoors and around the home or building.

Seek Thermal Compact Series
Compact Android

Seek Compact – Android
Compact iPhone

Seek Compact – iPhone
CompactXR Android CompactXR Android

Seek CompactXR – Android
CompactXR iPhone Compact iPhone

Seek Compact – iPhone

Click Here to see more Seek Thermal Products!

Weller WES51 and WESD51 Kits

WellerWeller WES51 and WESD51 Kits

http://assets.tequipment.net/assets/1/7/Weller_WESD51_Features.jpg

  • Powerful and Economical Continuous Production
  • Wireless Temperature Lockout
  • Digital Readout

The WES51 and WESD51 Kits is one in a series of products, which have been developed for industrial manufacturing as well as for the rework and repair sector. Microprocessor control and a digital display allow for simple and easy operation. The digital electronic control system offers excellent control performance for various soldering jobs.

Weller WES51 and WESD51 Kits

WES51 KIT1

STATION 50/60W 120V WES51 WITH 7 EXTRA TIPS – ETAA, ETA, ETS, ETO, ETD, ETB & ETP

WES51 KIT2

WES51 KIT2

STATION 50/60W 120V WES51 WITH 5 EXTRA TIPS – ETS, ETB, ETD, ETAA & ETP

WES51 KIT2

WES51 KIT3

STATION 50/60W 120V WES51 WITH XCELITE 170M SHEAR CUTTER

WESD51 KIT1

WESD51 KIT1

SOLDERING STATION,DIGITAL,50W,120V,ETA WITH 7 EXTRA TIPS – ETC, ETAA, ETB, ETO, ETKN, ETV & ETCC

WESD51 KIT2

WESD51 KIT2

SOLDERING STATION,DIGITAL,50W,120V,ETA WITH 5 EXTRA TIPS – ETC, ETAA, ETO, ETKN & ETCC

WESD51 KIT3

WESD51 KIT3

SOLDERING STATION,DIGITAL,50W,120V,ETA WITH XCELITE 170M SHEAR CUTTER

Click Here to see more Weller Products!

Vitrek V882 Precision Transformer Tester

V882 Precision Transformer Tester

Vitrek_V882_Transformer_TesterTN

The V882 Precision Transformer Tester offers a wide range of test frequencies from 100Hz up to 200KHz or optionally 1MHz, in order to meet the most demanding applications. The comprehensive capabilities of the V882, allow the unit to perform tests on many different types of magnetic and passive components. The combined “meter” and “tester” operating modes of the V882 permit maximum test flexibility while utilizing state-of-the-art measurement technology.

Click Here to see more Vitrek Products!

FLIR TG130 Spot Thermal Camera

TG130 Spot Thermal Camera

 

Save money on heating and cooling energy costs with the FLIR TG130 Spot Thermal Camera. Quickly find and troubleshoot temperature-related issues around the house and solve problems fast.

Built with a FLIR’s revolutionary Lepton thermal camera core, the TG130 allows people to:

  • Find heat loss around doors, floors, walls, pipes, or windows.
  • Expose spots where insulation is missing, and show drafts where cold air enters the house.
  • Identify the source of water leaks or find rodent nests behind walls (yikes!).
  • Save time and money on troubleshooting HVAC performance, electrical issues affecting home appliances, and use the TG130 to ensure that food is stored and served at a safe temperature.

The FLIR TG130 spot thermal camera is an entry-level camera for a broad spectrum of home and small business applications. By simply pointing the TG130 at an object, anyone can identify energy and temperature-related issues within and around a structure. From finding drafts, detecting heat loss around doors and windows, or locating areas of missing insulation, the TG130 pinpoints problems and helps users increase a home’s energy efficiency.

Hakko FM203 Dual Port Soldering Systems

The Hakko FM-203 is a Dual Port high performance soldering station. Even when soldering lead-free solders the high performance allows lower operating temperatures. The soldering station can operate any of the following hand pieces, FM-2027 Soldering Iron, FM-2022 Parallel Remover (SMD tweezer), FM-2023 Mini Parallel Remover (SMD mini tweezer), FM-2024 Desoldering Module, and/or FM-2026 Nitrogen Soldering Iron. The soldering iron and desolder tool can be used in either or both ports and the tweezers are limited to one port with a soldering or desoldering iron in the other port.

The station features a programmable sleep mode of 0-29 minutes or auto-power shut off at 30 minutes. Sleep mode, auto power shut off and tip temperature can be programmed separately for each port. The sleep mode reduces the tip temperature to approximately 200ºC (400ºF) after the programmed time (0-29 minutes). The lower tip temperature will reduce oxidation of the tip and improve the tip performance. When in sleep mode the tip will quickly return to temperature after the iron is removed from the holder.

Hakko FM203 Dual Port Soldering Systems
FM203-01

STATION,SDRG,2 PORTS,ESD,w/o TIP,FM-203
FM203-DP

SET,DUAL PORT,FM203-01 + FM2027-03
FM203-HD FM203-HD

STATION,SDRG,2 PORTS,ESD,w/FM-2030,w/o TIP,FM-203
FM203 Combo FM203 Combo

FM-203 Dual Port Soldering Station plus FM-2024 Desoldering Station Combo

Click Here to see more Hakko Products!