Seaward 344A914 Primetest 100 Pat Testing Kit

344A914 Primetest 100 Pat Testing Kit

 

Simple, fast and reliable way to check power tools, appliances and extension cords as part of an OSHA Assured Groundings Scheme.

The PrimeTest 100 is a new hand-held “quality meter” that facilitates fast and reliable electrical integrity checks on almost any electrical device plugged into a wall.

The PrimeTest 100 was designed for the demanding safety regulations of electrical device testing common in Europe, including construction site GFCI and assured grounding compliance.

Only 3 buttons and a large LCD screen gives a clear pass or fail It’s just a little added peace of mind when your tools and equipment aren’t always treated with the care you would like.

Sleek, robust design incorporates an integral rubber bumper for riding shotgun in your toolbox. It tests extension cords, power tools, appliances, IEC power cords, and also checks the power sockets they’re connected to.

Complete Electrical Integrity Check for the safety of your employees, your family, and your business. When used with our manual entry software PATGuard Elements the PT100 provides you with a solution to help you comply with OSHA’s assured grounding policy.

Oakton pH 700 Bench Meter

pH 700 Bench Meter

 

The easy-to-use, microprocessor-based pH 700 benchtop meter measures pH, mV, relative mV, and temperature. The large, dual-display LCD provides excellent visibility—even from a distance. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. Meter features HOLD, ATC, and electrode diagnostics. The convenient pull-out quick reference card keeps procedures handy at all times. Meter accepts any pH or ORP electrodes with a BNC connector.

Oakton ION 700 Benchtop Meter

ION 700 Benchtop Meter

 

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility—even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC connectors.

Oakton pH 2700 Benchtop Meter

pH 2700 Benchtop Meter

 

The pH 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

Oakton PCD 650 pH/Conductivity/ Dissolved Oxygen Meter

PCD 650 pH/Conductivity/ Dissolved Oxygen Meter

 

These top-of the-line waterproof meters offer features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet environments without harm to the meter. Datalog up to 500 points either automatically, manually, or at timed intervals. User-selectable “calibration due” alarms, automatic or manual standards recognition, and single or multiple calibration points provide flexibility in meeting your data quality objectives. Infrared (IrDA) wireless technology lets you easily download data—no need for additional cords. The large backlit LCD shows the measured value, measured units, temperature, time, battery life, and menu options.

Oakton CD 650 Conductivity/Dissolved Oxygen Meter

CD 650 Conductivity/Dissolved Oxygen Meter

 

The Oakton CD 650 conductivity/dissolved oxygen meter is a multi-parameter, handheld, waterproof, and dustproof meter, including kit. The meter measures conductivity, dissolved oxygen (DO), Total Dissolved Solids (TDS), temperature, salinity and resistivity within a substance, and is commonly used for waste water and salt water testing. This meter features automatic temperature compensation (ATC), with push-button calibration up to six points each for pH and conductivity, and three points for DO. It also has auto-buffer options and recognition, for ease of use. It has a large, backlit LCD screen to provide ease of viewing, and to display indicators. The meter has an adjustable, calibration-due alarm for performance. It stores up to 500 data sets, and has infrared, IrDA-wireless technology, for data communication. The meter has a built-in, real time clock with time and date stamping, and set-point alarms. It comes with an electrode status indicator and password protection. The meter has a conductivity range of 0 to 500.00 mS, resolution 0.01, 0.1 &muS; 0.001, 0.01, 0.1 mS, accuracy + or – 1.0 percent full-scale. Temperature range -10.0 to 110.0 degrees C (14.0 to 230.0 degrees F), resolution 0.1 degree C (0.1 degree F), and accuracy + or – 0.5 degrees C (+ or – 0.9 degrees F). DO range 0.00 to 90.00 mg/L (ppm), 0.0 to 600.0 percent, resolution 0.01 mg/L (ppm), 0.1 percent, accuracy + or – 2 mg/L; + or – 2%. TDS range is 0 to 500 ppt, + or – 0.05% full-scale (FS), range + or – 1% FS. Salinity 0 to 80 ppt. Resistivity 0 to 20.00 MO. Its dimensions are 7.25(l) x 3.25(w) x 2.25(h) inches, and it weighs 1.0 lb (0.45 kg). The meter has the ability to store up to 500 data sets in memory, until information can be communicated. Time and date stamping meets Good Laboratory Practice (GLP) standards, and the meter is Ingress Protection (IP) 67-rated, for protection against solid objects or liquids. The meter can be used with four 1.5 V AA batteries (not included), or a universal AC adapter (sold separately).

HT Instruments GSC60 Professional Safety Tester and Network Analyzer

GSC60 Professional Safety Tester and Network Analyzer

 

The GSC60 instrument is equipped with a TFT color LCD display, with capacitive “touch-screen” that can be handled simply with the touch of a finger by the user and is structured with an icon-based menu allowing the direct selection of measurement functions for quick and intuitive use.

Earth Resistance

  • Earth resistance with 2- or 3-pole volt-ampere method in TT, TN and IT systems
  • Soil resistivity with 4-pole Wenner method.
  • Stackless earth ground resistance measurement with T2100
  • Non-trip earth loop impedance measurement

Power Quality and energy analysis

  • 9 types of electrical systems available
  • 632 parameters can be recorded for over two months. Real-time display of all waveforms, harmonics, vector diagrams as well as summary function on phases for a quick reading of the most important parameters.
  • Detection of voltage anomalies with a resolution of 20ms
  • Measures and record the electrical absorption of all the equipment connected to the main power supply

Viper FLIR A310 pt Multi-Sensor Thermal Imaging Camera

FLIR A310 pt Multi-Sensor Thermal Imaging Camera

 

FLIR A310 pt thermal cameras can be installed almost anywhere to monitor the condition of your critical equipment and other valuable assets. Designed to help safeguard your plant and measure temperature differences, they allow you to see problems before they become costly failures — preventing downtime and enhancing worker safety.

FLIR A310 pt is ideal for various applications that require temperature measurement capabilities including: substation, transformer, waste bunker, and coal pile monitoring.

Instek AC Power Source APS-7000E Series

AC Power Source APS-7000E Series

 

GW Instek launches the APS-7000E series the economy version of the APS-7000 programmable AC power source. With the height of 2U, the maximum rated output for APS-7050E is 500VA, 310Vrms, 4.2Arms and APS-7100E is 1000VA, 310Vrms, 8.4Arms. The output frequency range of the series is 45~500Hz. The series is ideal for the test and development of DC power supply devices, consumer electronics, automotive electronics and electronic components.

The APS-7000E series comprises six measurement and test functions (Vrms, Irms, F, Ipk, W, PF), and provides user interface similar to that of AC Power Meter. The APS-7000E series, via switching many sets of current levels to increase small current measurement resolution, is ideal for the LED industry and standby mode power consumption test. Ten sets of Preset allow users to store ten settings.

Fluke TIX560/T2 60HZ 320X240 Thermal Imager 60 HZ with TELE2 Lens

TIX560/T2 60HZ 320X240 Thermal Imager 60 HZ with TELE2 Lens

 

Fluke TiX560 60HZ Thermal Imager; 320×240; 60 HZ. with SuperResolution on Camera
With a 180° articulating lens, the largest LCD touchscreen and leading spatial resolution for a 320×240 infrared camera in its class¹, the answer is right before your eyes, even when your target isn’t.

Flexible and Ergonomic Form Factor
Easily navigate over, under and around objects with the 180° articulating FlexCam lens and see the image before you capture it.
Fluke Connect® Wireless System
See, save and share from the field and connect to the largest selection of wireless test and measurement tools with Fluke Connect™.