Fluke TI400 60HZ/FCB TI400 Thermal Imager with A3001FC, 805 Meter

TI400 60HZ/FCB TI400 Thermal Imager with A3001FC, 805 Meter

 

Powerful high-performance features make troubleshooting fast and easy.
Technology changes. The last thing we want is for you to feel like you’re missing out on critical innovations, so Fluke has engineered the Ti400 infrared camera to adapt to change.

Being future-ready is part of its DNA. You can test and measure with wireless speed and ease and connect with other wireless devices. If there’s an infrared camera in your future, make sure it’s one with a future.

Auto Focus Redefined

Get an in-focus image like never before with the touch of a button. LaserSharp®  Auto Focus, exclusive to Fluke, uses a built-in laser distance meter that calculates and displays the distance to your designated target with pinpoint accuracy. Other auto focus systems may focus on the surrounding landscape or closer targets and compromise an in-focus and your ability to get accurate temperature measurements.

On target and in-focus. Every. Single. Time.

HT Instruments ZG47 Phase Power Analyzer with Earth Ground Testing

ZG47 Phase Power Analyzer with Earth Ground Testing

 

ZG47 is the complete and versatile multifunction device developed starting from real installation needs.

In a single device, all functions of the most advanced systems for safety testing (standards CEI 64.8) developed by HT; possibility of carrying out mains analyses, THREE-PHASE or SINGLE-PHASE (voltages, currents, powers, power factor, energies, etc.), voltage/current harmonic analysis (up to the 49th) and an analysis of the anomalies on power supply voltages (dips, peaks). The device has a whole variety of functions and can be used with external feelers for measuring environmental parameters such as temperature/humidity of air, illuminance (Lux) further to measuring leakage currents, Loop/Line impedance and calculating the assumed short-circuit current with high resolution (0.1mOhm) in TN systems with the use of the optional accessory IMP57. Cutting-edge management of measurement with indication, at the end of each safety test, of compliance or non-compliance with requirements with simple symbols OK or NOT OK.

Oakton PC 650 pH/Conductivity Meter

PC 650 pH/Conductivity Meter

 

The Oakton PC 650 pH/conductivity meter is a multi-parameter, handheld, waterproof and dustproof meter kit. The meter is commonly used to measure pH, conductivity, temperature, Total Dissolved Solids (TDS), and mV of a substance. The PC 650 features ATC, with pH calibration up to six points, and up to 15 auto-buffer options. It has recognition of USA, National Institute of Standards and Technology (NIST), Deutsches Institut für Normung (DIN) and PWB standards, for ease of use. It has a large, backlit LCD screen to provide ease of viewing, and to display indicators. The meter has an adjustable alarm to remind you when calibration is due. It stores up to 500 data sets, and has IrDA wireless technology for data communication. The meter has a built-in, real time clock with time and date stamping and set-point alarms, and a built-in stand. It comes with an electrode status indicator and password protection.

Oakton WD-35427-50 Temp-300 Datalogging Thermocouple Thermometer

WD-35427-50 Temp-300 Datalogging Thermocouple Thermometer

 

Oakton Temp-300 thermometer features real-time datalogging and a USB data output. Meter accepts dual inputs from type J, K, T, E, R, S, N, or B thermocouples probes with miniconnector. This robust and reliable meter works in any environment from the lab to the production floor. Sturdy armored construction protects against knocks and jars. Sealed keypad and ABS plastic case meet IP54 standards for splash resistance. Ergonomically designed housing is ideal for both large and small hands alike.

Large, illuminated display features easy-to-read digits. The seven-button control panel and intuitive on-screen menus guide you in choosing your desired functionality. Additional meter features include Min/Max, Hold, and average functions; temperature units in °F, °C, °R, or K; offset; time tamp/clock; countdown timer; out-of-range alarm with audible/visible indicator; auto shutoff; and low-battery indicator. Order an optional AC adapter to conserve battery life during extended operations.

Oakton Temp 10 Thermocouple Thermometers

Temp 10 Thermocouple Thermometers

 

These robust and reliable meters work in any environment from the lab to the production floor. The sturdy optional armor protects against knocks and jars. All models are ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance.

Features include a large easy-to-read illuminated display, an easy-to-use five-button control panel, Min/Max, Hold, °F / °C switchable, auto shutoff, and low battery indicator. Each thermometer is individually factory calibrated. Automatic field calibration is easily performed. Simply place the probe in a container packed with ice, fill with water, then press the “CAL” button—meter automatically recognizes the freezing point.

Temp 10 Thermocouple Thermometers
Choose from models for J, K, or T input

  • Standard miniconnectors – Choose from a wide variety of probes
  • All push-button operation – For fast, easy use
  • Ergonomic design – Easy to grip for one-handed operation
  • °C/°F selectable
  • Minimum and maximum temperature  display – Displays highest/lowest temperature since meter was switched on, or use Min/Max Hold Mode to continuously update lowest/highest temperature
  • Temperature offset calibration  adjustment – Push-button adjustment for fine-tuning factory calibration
  • Hold function – Freezes measurements for convenient reading and recording
  • Auto-off function – Turns off meter after 17 minutes of nonuse to save batteries
  • Sealed keypad and ABS plastic case – Meet IP54 standards for splash resistance
  • Available rubber armor – Protects meter; features a built-in stand

Oakton WD-35426-60 Temp 360 Datalogging RTD Thermometer

WD-35426-60 Temp 360 Datalogging RTD Thermometer

 

Oakton Temp-360 thermometer that has real time datalogging and a USB data output. This robust and reliable meter is ideal for use in food processing plants, research and science labs, building maintenance areas and more! The sturdy armored construction protects against knocks and jars. Ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance. The meter has a large illuminated display, and a seven-button control panel that allows the user through easy-to-use menus to choose desired functionality.

The sevenbutton control panel and intuitive on-screen menus guide you in choosing your desired functionality. Additional meter features include Min/Max, Hold, and average functions; °F/°C selection; time stamp/clock; countdown timer; out-of-range alarm with audible/visible indicator; auto shutoff; and low-battery indicator. Manually store or automatically log up to 2000 sets of readings in real time. Log interval is selectable from 1 second to 60 minutes. Order an optional AC adapter to conserve battery life during extended operation.

OAKTON’s exclusive “3-WAY HANDS-FREE” capability allows “hands-free” operation— use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the “hands-free” option adds magnets and strap (order separately).

Oakton WD-35426-20 Temp 16 RTD Thermometer

WD-35426-20 Temp 16 RTD Thermometer

 

Temp-16 Thermometer features a five-button control panel, Min/Max and Hold functions,°F/°C selection, auto shutoff, and low-battery indicator. These robust and reliable meters work in any environment from the lab to the production floor.

The available sturdy armored construction protects against knocks and jars. Meters are ergonomically designed for both large and small hands alike. The sealed keypad and ABS plastic case meet IP54 standards for splash resistance.

Each thermometer is individually factory calibrated. Automatic field calibration is easily performed: simply place the probe in a container packed with ice, fill with water, then press the “CAL” button—meter automatically recognizes the freezing point.

Oakton Multiparameter 35-Series Testrs

Multiparameter 35-Series Testrs

 

Great for water, laboratory or plant use, these multiparameter Testrs feature single-junction pH electrodes for longer life and wider range of sample compatibility. Pin-style conductivity sensors feature stainless steel electrodes for chemical resistance and durability. Replaceable sensor module saves you money by reusing the meter body. Advanced features include auto-shutoff, user-adjustable temperature coefficient and low-battery indicator.

Multiparameter 35-Series Testrs
Our most versatile Testrs combine up to  five measurements in one pocket-sized meter

  • Determine pH, conductivity, TDS, salinity, and temperature – Great for water, wastewater, laboratory, or plant use
  • Accuracy up to ±0.01 for pH;  ±1% full-scale for EC/TDS/salt – Ideal for a wide variety of applications
  • Long-lasting pH sensor with PVDF reference junction – Large volume of polymer gel reference gives long, clog-free sensor lifespan
  • Stainless steel pin-style conductivity sensors – Durable and compatible with a wide range of samples
  • Adjustable TDS factor, temperature coefficient, and salinity factor – Provide accurate readings under changing conditions
  • Push-button calibration – Calibrate more precisely than trimpot adjustment;  no screwdrivers necessary
  • Automatic temperature compensation (ATC) – Gives you accurate readings even with fluctuating temperatures
  • Waterproof, dustproof housing – Meets IP67 rating, plus it floats!
  • Hold function – Freezes reading until you can record it
  • Auto shutoff – Extends the life of batteries

Oakton WD-35423-10 EcoTestr pH 2

WD-35423-10 EcoTestr pH 2

 

Simply dip and read the orientation of the display means no need to turn your head or tilt the tester. This low-cost meter is perfect for most applications. The single-junction electrode is recessed to protect against breakage. The unit offers up to three-point calibration with auto-buffer recognition for quick calibrations, automatic temperature compensation for accurate reading under changing conditions, hold function to lock measure value, and auto-off to prolong battery life.

Oakton Ion 2700 Benchtop Meter

 Ion 2700 Benchtop Meter

 

The Ion 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.