The new OWL WaveTester / WaveSource Series Auto-Test Kits


The new OWL WaveTester / WaveSource Series Auto-Test Kits

The WaveTester is a very economical option for measuring the optical power of both multimode and singlemode fibers. The WaveTester is NIST traceable, and is calibrated 850, 1300, 1310, and 1550nm, as well as 1490nm, one of the key wavelengths used in FTTx PON networks. Reference values used for optical loss readings are stored for each of these wavelengths.

The WaveTester has a user-friendly interface which includes four push-buttons, and also includes a 2.5mm universal connector, which is compatible with many popular fiber connectors, such as ST, SC, and FC, and a 1.25mm universal connector adapter that allows for connection to LC, MU, and other SFF connectors.

The WaveTester is ideal for fiber optic professionals who need to quickly measure the loss in their fiber optic links, as well as simple data storage and auto-testing fiber link certification.

Click Here to See More OWL Products!

EX355P/EX355P-USB: Operation via RS-232 or USB

EX355P/EX355P-USB: Operation via RS-232 or USB

The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface.
It offers a low-cost solution for a basic programmable PSU and will be sufficient for many applications where the sophistication and complexity of GPIB is not needed.

A simple command set allows remote control of voltage, current and output enable together with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current during bench use. The EX355P-USB has similar functionality but is controlled via a USB interface.

Click Here to See More TTi Products!

The New EX-R Series Mixed-Mode Regulated Precision DC Bench Power Supplies

The New EX-R Series Mixed-Mode Regulated Precision DC Bench Power Supplies

The new EX-R series has been extended by incorporating models from the best selling EX series. By adding four digit meters and switchable remote sensing, the EX-R series offers much higher precision whilst retaining the simplicity of operation which many bench-top power supply users prefer. Six models are offered including single, dual and triple outputs and covering a power range of 175 watts up to 420 watts.

The EX-R series combines high frequency switch-mode pre regulation with linear post-regulation to provide performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. EX-R series power supplies are fitted with the new TTi designed output terminals. These can accept a 4mm safety plug with rigid insulating sleeve, a requirement specified by an increasing number of laboratories for safety reasons.

The EX-R series includes four single output models plus one dual output and one triple output model. All outputs are intrinsically short circuit proof, and are protected against external voltages and reverse currents.

Click Here to See More TTi Products!

EL302P/EL302P-USB: operation via RS-232 or USB

EL302P/EL302P-USB: operation via RS-232 or USB

The EL302P is a digitally controlled version of the EL302 with an isolated RS-232 interface. It offers a low-cost solution for a basic programmable PSU and will be sufficient for many applications where the sophistication and complexity of GPIB is not needed.

A simple command set allows remote control of voltage, current and output enable together with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current during bench use.

The EL302P-USB has similar functionality but is controlled via a USB interface.

Click Here to See More TTi Products!

The New EX-L Series Linear Regulated Precision DC Bench Power Supplies

The New EX-L Series Linear Regulated Precision DC Bench Power Supplies

The new EL-R series has been developed from the top selling EL series. By adding four digit meters and switchable remote sensing, the EL-R series offers much higher precision whilst retaining the simplicity of cooperation which many bench-top power supply users prefer.

Eight models are offered including single, dual and triple outputs and covering a power range of 30 watts up to 130 watts. The EL-R series incorporates separate voltage and current meters on each main output with a resolution of 10mV and 1mA. The fixed resolution avoids the misinterpretation of readings that can occur with auto-ranging 3 or 3½ digit meters where the decimal point position moves as the reading changes.

Click Here to See More TTi Products!

IET Labs CS Series Precision Capacitance Substituter & Decade Box


IET Labs CS Series Precision Capacitance Substituter & Decade Box

The CS Series Capacitance Decade Box is a cost effective and commonly used capacitance decade box for production and educational applications.

The easy of use and 1% accuracy makes the CS Box ideal for daily verification of test equipment before measurements, troubleshooting in the field or on the factory floor. The wide range of capacitance values from 50 pF to 1000 uF (depending on model) is indispensable in laboratory, R&D and teaching applications.

Made of high impact plastic and weighing less than a pound, these capacitance decade boxes are very portable and can reduce clutter on a busy lab bench. The CS Series utilizes a variety of highly stable film resistors for values less than 10 uF and tantalum capacitors for higher values.

Click Here to See More IET Labs Products!

Summit Technology PK4564 PowerSight PS4500 Power Quality Analyzer


Summit Technology LogoSummit Technology PK4564 PowerSight PS4500 Power Quality Analyzer


This complete package has all that you need for complete analysis of single and 3-phase circuits up to 6000 amps and voltages up to 600 volts. The PK4564 bundles 4 eFX6000 flexible probes with the PS4500 PowerSight Power Quality Analyzer in a hard shell carry case.

The FX6000 flexible current probe is ideal for tight and confined spaces and larger conductors. Unlike other flexible Rogowski – type probes the FX6000 has excellent low current measurement capability in its low range for 1 – 150 amps, plus a high range for 10 – 6000 amps measurements: eFX6000 Flexible Current Probe. This kit comes with PC software and Report Writer.

Click Here to See More Summit Technology Products!

Fluke 750P/750R Series Pressure Modules

Fluke 750R29 Pressure ModuleFluke 750P/ 750R Series Pressure Modules

A Complete Family of Pressure Modules

A family of 48 pressure modules covers pressure calibrations from 0 to 1 in H20 to 10,000 psi (2.5 mBar to 690 bar).

Gage pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labeled for range, over pressure and media compatibility. All modules include NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multi-function and pressure calibrators (including: Fluke 754, 752, 726, 725, 721, 719 Pro, 719, 717 and legacy 741, 743, 744, 701 and 702 calibrators).

Fluke 750P/ 750R Series Pressure Modules are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. When used with the 750 Series Documenting Process Calibrators, pressure readings can be date/time stamped and stored electronically for later retrieval. This saves time, eliminates errors, and supports compliance with quality standards and regulations.

Click Here to See More Fluke Products!

Introducing the New Amprobe AT-7000 Advanced Wire Tracer


Introducing the New Amprobe AT-7000 Advanced Wire Tracer

Easy-to-use and accurate wire tracer for locating breakers and tracing wires
Get accurate results in minutes with new features and technologies that simplify wire tracing and breaker identification. The Receiver’s patented Smart Sensor™ with its innovative new antenna design and advanced signal processor, clearly displays the location and orientation of energized wires in walls, floors and ceilings on the large color TFT LCD screen. The powerful Transmitter utilizes two optimal frequencies for both energized and de-energized wire and breaker tracing, delivering consistently accurate results for novice users and experts alike. The new Scan and Locate feature clearly identifies the one correct breaker or fuse, eliminating the confusion from multiple false positive readings common in older technology tracing tools.

The AT-7000 has the following additional features, these are Traces Energized and De-Energized Wires in walls, floors and ceilings, Locates Energized and De-Energized Breakers, Pinpoints Shorts and Opens, Traces AC/DC Circuits 0-600 V, Three Power Modes, Two frequency modes for optimal tracing on energized and de-energized circuits, Signal booster rechargeable battery pack (BR-7000-T) increases transmitter signal strength and Clamp-on attachment (SC-7000) for inducing signal into wires without access to bare conductors.

Click Here to See More Amprobe Products!

Eclipse Tools 1PK-1700NA Electronics Master Tool Kit

Eclipse Tools 1PK-1700NA Electronics Master Tool Kit

The Eclipse 1PK-1700NA is an Electronics Master Tool Kit – Briefcase Style. Designed for electricians and IT professionals, this Master Kit has all the tools you will need for most electrical projects.

The Eclipse Electronics Master Tool Kit stores included electronic tools in a convenient tool carrying case. The tool carry case features removable pallets and an anti-static strap.

Click Here to See More Eclipse Tools Products!