Compliance West 1.2×50-7P MegaPulse Surge Tester

Compliance West 1.2×50-7P MegaPulse Surge Tester

Compliance West 1.2×50-7200P MegaPulse Surge Tester 39 ohm

The MegaPulse 1.2×50-7P waveform is designed to provide the pulse needed to conduct the Test described in EN60950, Annex N, Table N.1, Line 2 for Data Processing Equipment. This tester can test for the Australian Deviation, which requires a 7kV peak surge. The waveform is in tolerance with the requirements of IEC 1180 from 1000-7000V at the bulk cap and has an output impedance of 38 ohms.The front panel meter reads the bulk capacitor voltage (not the output voltage) in accordance with the requirements of Annex N. Optionally built with a relay conforming to the requirements of IEC 60065, Figure 7b. Optionally equipped with a 1000:1 reference BNC for reading peak voltage only. Optionally equipped with TestMinder, allowing computer control via USB.Optional Configurations

  • Built with a relay conforming to the requirements of IEC 60065, Figure 7b
  • Equipped with a 1000:1 reference BNC for reading peak voltage only
  • Equipped with TestMinder, allowing computer control via USB

Click here for more related items!

Leave a Reply