OWON HDS-N Series Handheld Digital Storage Oscilloscope

OWON HDS-N Series Handheld Digital Storage Oscilloscope

 

Performing the General Inspection
When you have got a new HDS-N series oscilloscope, it is suggested that you should perform a general inspection on the instrument according to the following steps.

Check whether there is any Damage on it Due to Transportation
If the packing boxes or foam cushions are found in serous damage, keep them in a proper place till the complete instrument and accessories have passed the electrical and mechanical tests.

Make a Check on Accessories
The accessory list has been described in the picture of Digital Oscilloscope Parts of this manual. You can make a check and find whether there is any accessory loss with reference to the Appendix. In case of any accessory loss or damage, consult the OWON dealer responsible for such a business or the local office of OWON.

Make a Check on the Complete Instrument
If the instrument is damaged in its appearance or it fails in normal operation or performance test, consult the OWON dealer responsible for such a business or the local office of OWON. If the instrument is damaged due to transportation, keep the packing in a proper place and consult the transportation department and the OWON dealer responsible for such business, who will provide an instrument replacement or maintenance.

OWON_HDS-N_Series_Input_Connections_tn
Input connections

Description:

  1. The power adapter is supplied for AC power supply and battery recharging.
  2. Multimeter test lead.
  3. Multimeter input jacks, including four circular banana jacks. The first jack measuring the current 2 A-10A, the second jack on the current Measurement, the third COM ground input, and the fourth measuring voltage, resistance, Capacitance input.
  4. Oscilloscope probes.
  5. Oscilloscope channel inputs: the upper one is for Channel 1 (CH1), while the lower one is for Channel 2 (CH2).
  6. The output terminal of 1 kHz/5 V square-wave test signal.

The connection of 1 kHz/5 V Square-wave test signal

At the left side of the oscilloscope, it is a port for testing 1 kHz/5 V square-wave signal which is used to adjust the probe.
OWON_Square-wave_test_signal_tn
The connection of Square-wave test signal

 

Front Panel and Keys Overview

OWON_HDS-N_Series_Front_Panel_tn

Description:

  1. AC adapter Port
  2. RS-232C Port.
  3. USB Port.
  4. USB Mass Storage Port.
  5. Power switch.
  6. F1 – F5: Switch or Adjust options for each menu.
  7. AUTO SET: Under DSO mode, automatically selects the horizontal scales, vertical scale, and trigger level according to the input signal.
  8. COPY: Press to save the waveform data into the USB Mass Storage Device.
  9. ▲ (red): Adjust voltage scale or vertical position in Channel 1.
  10. VOLTS POSITION (red): Switch between voltage scale and vertical position in Channel 1.
  11. ▼ (red): Adjust voltage scale or vertical position in Channel 1.
  12. ▲ (blue): Adjust voltage scale or vertical position in Channel 2.
  13. VOLTS POSITION (blue): Switch between voltage scale and vertical position in Channel 2.
  14. ▼ (blue): Adjust voltage scale or vertical position in Channel 2.
  15. RUN/STOP: key for running or stopping the operation
  16. LIGHT: Light switch.
  17. DMM/OSC: Operation mode switching key between oscilloscope and multimeter.
  18. MENU ▲: Choose the upper item on the menu list.
  19. MENU: Show / Hide the menu
  20. MENU ▼: Choose the lower item on the menu list.
  21. OPTION: the key for DSO setting and combines with four arrow keys. Then to set main time base, trigger horizontal position and trigger vertical position. Furthermore the keys possible to adjust the display multiplying factors of M waveform (CHMath Volts/Div ) and display vertical position (CHM Zero) during waveform calculation and to adjust cursor 1 (V1 or T1) and cursor 2 (V2 or T2) position during cursor measurement.
  22. ▲ (yellow): Oscilloscope display upward adjustment key.
  23. ▼ (yellow): Oscilloscope display downward adjustment key.
  24. ► (yellow): Oscilloscope right-direction adjustment key.
  25. ◄ (yellow): Oscilloscope left-direction adjustment key.
  26. A: Selects DMM current measurement
  27. V: Selects DMM voltage measurement
  28. R: Selects DMM impedance, diode, continuity and capacitance measurement
  29. SET: convert AC and DC during measure current or voltage in Multi-meter; convert resistance, diode, on-off and capacitance measure during resistance measuring.

 

OWON HDS-N Series Handheld Digital Storage Oscilloscope

OWON HDS4202M-N
USB Oscilloscope – 200M New Handheld Series
OWON HDS2062M-N
Handheld 60 MHz 2 Channel 250MS/s Digital Storage Oscilloscope & Multimeter + FFT funciton
OWON HDS1022M-N
Handheld 20 MHz 2 Channel 100MS/s Digital Storage Oscilloscope & Multimeter + FFT function

Click here for more related items!

Leave a Reply